VS-20ETF02S-M3, vs-20etf04s-m3, vs-20etf06s-m3 series www.vishay.com vishay semiconductors revision: 11-feb-16 1 document number: 94886 for technical questions within your region: diodesamericas@vishay.com , diodesasia@vishay.com , diodeseurope@vishay.com this document is subject to change without notice. the products described herein and this document are subject to specific disclaimers, set forth at www.vishay.com/doc?91000 surface mount fast soft recovery rectifier diode, 20 a features ? glass passivated pellet chip junction ? meets msl level 1, per j-std-020, lf maximum peak of 260 c ? designed and qualified according to jedec ? -jesd 47 ? material categorization: ? for definitions of compliance please see www.vishay.com/doc?99912 applications ? output rectification and freewheeling in inverters, choppers and converters ? input rectifications wher e severe restrictions on conducted emi should be met description the vs-20etf..s-m3 soft recovery rectifier series has been optimized for combined short reverse recovery time and low forward voltage drop. the glass passivation ensures st able reliable operation in the most severe te mperature and power cycling conditions. ? ? product summary package to-263ab (d 2 pak) i f(av) 20 a v r 200 v, 400 v, 600 v v f at i f 1.3 v i fsm 300 a t rr 60 ns t j max. 150 c diode variation single die snap factor 0.6 ba s e cathode + 2 13 anode -- anode 1 2 3 to-26 3 ab (d 2 pak) major ratings and characteristics symbol characteristics values units i f(av) sinusoidal waveform 20 a v rrm 200 to 600 v i fsm 300 a v f 10 a, t j = 25 c 1.2 v t rr 1 a, 100 a/s 60 ns t j range -40 to +150 c voltage ratings part number v rrm , maximum peak reverse voltage v v rsm , maximum non-repetitive peak reverse voltage v i rrm at 150 c ma VS-20ETF02S-M3 200 300 5 vs-20etf04s-m3 400 500 vs-20etf06s-m3 600 700 absolute maximum ratings parameter symbol test conditions values units maximum average forward current i f(av) t c = 97 c, 180 conduction half sine wave 20 a maximum peak one cycle ? non-repetitive surge current i fsm 10 ms sine pulse, rated v rrm applied 250 10 ms sine pulse, no voltage reapplied 300 maximum i 2 t for fusing i 2 t 10 ms sine pulse, rated v rrm applied 316 a 2 s 10 ms sine pulse, no voltage reapplied 442 maximum i 2 ? t for fusing i 2 ? t t = 0.1 ms to 10 ms, no voltage reapplied 4420 a 2 ? s
VS-20ETF02S-M3, vs-20etf04s-m3, vs-20etf06s-m3 series www.vishay.com vishay semiconductors revision: 11-feb-16 2 document number: 94886 for technical questions within your region: diodesamericas@vishay.com , diodesasia@vishay.com , diodeseurope@vishay.com this document is subject to change without notice. the products described herein and this document are subject to specific disclaimers, set forth at www.vishay.com/doc?91000 note (1) when mounted on 1" square (650 mm 2 ) pcb of fr-4 or g-10 material 4 oz. (140 m) copper 40 c/w. ? for recommended footprint and soldering tech niques refer to appl ication note #an-994. electrical specifications parameter symbol test conditions values units maximum forward voltage drop v fm 20 a, t j = 25 c 1.30 v 60 a, t j = 25 c 1.67 forward slope resistance r t 12.5 m ? threshold voltage v f(to) t j = 150 c 0.9 v maximum reverse leakage current i rm t j = 25 c v r = rated v rrm 0.1 ma t j = 150 c 5.0 recovery characteristics parameter symbol test conditions values units reverse recovery time t rr i f at 20 a pk ? 100 a/s ? 25 c 160 ns reverse recovery current i rr 10 a reverse recovery charge q rr 1.25 c snap factor s typical 0.6 i fm t rr dir dt i rm(rec) q rr t t a t b thermal - mechanical specifications parameter symbol test conditions values units maximum junction and storage ? temperature range t j , t stg -40 to +150 c maximum thermal resistance, ? junction to case r thjc dc operation 0.9 c/w maximum thermal resistance ? junction to ambient (pcb mount) r thja (1) 40 soldering temperature t s 260 c approximate weight 2g 0.07 oz. marking device case style to-263ab (d 2 pak) 20etf02s 20etf04s 20etf06s
VS-20ETF02S-M3, vs-20etf04s-m3, vs-20etf06s-m3 series www.vishay.com vishay semiconductors revision: 11-feb-16 3 document number: 94886 for technical questions within your region: diodesamericas@vishay.com , diodesasia@vishay.com , diodeseurope@vishay.com this document is subject to change without notice. the products described herein and this document are subject to specific disclaimers, set forth at www.vishay.com/doc?91000 fig. 1 - current rati ng characteristics fig. 2 - current rati ng characteristics fig. 3 - forward power loss characteristics fig. 4 - forward power loss characteristics fig. 5 - maximum non-re petitive surge current fig. 6 - maximum non-re petitive surge current 80 70 150 06 maximum allowable case temperature (c) average forward current (a) 4 28 100 10 22 120 90 130 110 30 60 90 120 180 conduction angle 20etf.. series r thjc (dc) = 0.9 k/w 12 14 16 18 20 140 ? 90 80 150 025 maximum allowable case temperature (c) average forward current (a) 15 530 110 35 120 100 10 20 130 140 20etf.. series r thjc (dc) = 0.9 k/w ? conduction period 30 60 90 120 180 dc 10 0 35 0 maximum average forward power loss (w) average forward current (a) 20 25 25 30 20 10 15 5 5 15 180 120 90 60 30 rms limit 20etf.. series t j = 150 c conduction angle ? 10 0 45 0 maximum average forward power loss (w) average forward current (a) 30 25 35 35 15 10 20 5 15 25 20etf.. series t j = 150 c ? conduction period rms limit 180 120 90 60 30 dc 5 20 30 40 300 50 1 10 100 peak half sine wave forward current (a) number of equal amplitude half cycle current pulses (n) 200 100 150 250 at any rated load condition and with rated v rrm applied following surge. initial t j = 150 c at 60 hz 0.0083 s at 50 hz 0.0100 s 20etf.. series 450 150 50 0.001 0.01 1 peak half sine wave forward current (a) pulse train duration (s) 300 100 200 250 350 550 maximum non-repetitive surge current versus pulse train duration. 20etf.. series initial t j = 150 c no voltage reapplied rated v rrm reapplied 0.1 500 400
VS-20ETF02S-M3, vs-20etf04s-m3, vs-20etf06s-m3 series www.vishay.com vishay semiconductors revision: 11-feb-16 4 document number: 94886 for technical questions within your region: diodesamericas@vishay.com , diodesasia@vishay.com , diodeseurope@vishay.com this document is subject to change without notice. the products described herein and this document are subject to specific disclaimers, set forth at www.vishay.com/doc?91000 fig. 7 - forward voltage drop characteristics fig. 8 - recovery time characteristics, t j = 25 c fig. 9 - recovery time characteristics, t j = 150 c fig. 10 - recovery charge characteristics, t j = 25 c fig. 11 - recovery charge characteristics, t j = 150 c fig. 12 - recovery current characteristics, t j = 25 c 1000 10 1 012 5 instantaneous forward current (a) instantaneous forward voltage (v) 100 34 20etf.. series t j = 25 c t j = 150 c 0.20 0.15 0 0 200 400 600 800 1000 t rr - typical reverse recovery time (s) di/dt - rate of fall of forward current (a/s) 0.05 0.10 20etf.. series t j = 25 c i fm = 30 a i fm = 20 a i fm = 10 a i fm = 5 a i fm = 1 a 0.5 0.4 0 0 200 400 600 800 1000 t rr - typical reverse recovery time (s) di/dt - rate of fall of forward current (a/s) 0.2 0.3 i fm = 30 a i fm = 1 a i fm = 20 a i fm = 10 a i fm = 5 a 20etf.. series t j = 150 c 0.1 4.0 0 0 200 400 600 800 1000 q rr - typical reverse recovery charge (c) di/dt - rate of fall of forward current (a/s) 0.5 2.0 1.0 3.0 1.5 2.5 3.5 20etf.. series t j = 25 c i fm = 30 a i fm = 20 a i fm = 10 a i fm = 5 a i fm = 1 a 5 3 0 0 200 400 600 800 1000 q rr - typical reverse recovery charge (c) di/dt - rate of fall of forward current (a/s) 1 2 4 20etf.. series t j = 150 c i fm = 30 a i fm = 20 a i fm = 10 a i fm = 5 a i fm = 1 a 6 7 8 9 10 70 30 0 0 200 400 600 800 1000 i rr - typical reverse recovery current (a) di/dt - rate of fall of forward current (a/s) 10 20 50 40 60 20etf.. series t j = 25 c i fm = 30 a i fm = 20 a i fm = 10 a i fm = 5 a i fm = 1 a
VS-20ETF02S-M3, vs-20etf04s-m3, vs-20etf06s-m3 series www.vishay.com vishay semiconductors revision: 11-feb-16 5 document number: 94886 for technical questions within your region: diodesamericas@vishay.com , diodesasia@vishay.com , diodeseurope@vishay.com this document is subject to change without notice. the products described herein and this document are subject to specific disclaimers, set forth at www.vishay.com/doc?91000 fig. 13 - recovery current characteristics, t j = 150 c fig. 14 - thermal impedance z thjc characteristics 100 60 0 0 200 400 600 800 1000 i rr - typical reverse recovery current (a) di/dt - rate of fall of forward current (a/s) 20 40 80 20etf.. series t j = 150 c i fm = 30 a i fm = 20 a i fm = 10 a i fm = 5 a i fm = 1 a 0.01 1 10 1 0.0001 0.001 0.01 0.1 square wave pulse duration (s) z thjc - transient thermal impedance (k/w) 0.1 single pulse 20etf.. series steady state value (dc operation) d = 0.50 d = 0.33 d = 0.25 d = 0.17 d = 0.08
VS-20ETF02S-M3, vs-20etf04s-m3, vs-20etf06s-m3 series www.vishay.com vishay semiconductors revision: 11-feb-16 6 document number: 94886 for technical questions within your region: diodesamericas@vishay.com , diodesasia@vishay.com , diodeseurope@vishay.com this document is subject to change without notice. the products described herein and this document are subject to specific disclaimers, set forth at www.vishay.com/doc?91000 ordering information table ordering information (example) preferred p/n quantity per t/r minimum order quantity packaging description VS-20ETF02S-M3 50 1000 anti static plastic tubes vs-20etf02strr-m3 800 800 13" diameter reel vs-20etf02strl-m3 800 800 13" diameter reel vs-20etf04s-m3 50 1000 anti static plastic tubes vs-20etf04strr-m3 800 800 13" diameter reel vs-20etf04strl-m3 800 800 13" diameter reel vs-20etf06s-m3 50 1000 anti static plastic tubes vs-20etf06strr-m3 800 800 13" diameter reel vs-20etf06strl-m3 800 800 13" diameter reel links to related documents dimensions www.vishay.com/doc?95046 part marking information www.vishay.com/doc?95444 packaging information www.vishay.com/doc?95032 2 - current rating (20 = 20 a) 3 - circuit configuration: e = single diode 4 - package: t = d 2 pak 5 - type of silicon: f = fast soft recovery rectifier 6 - voltage code x 100 = v rrm 7 - s = surface mountable - -m3 = halogen-free, rohs-compliant, and terminations lead (pb)-free 8 - none = tube trr = tape and reel (right oriented) trl = tape and reel (left oriented) 9 02 = 200 v 04 = 400 v 06 = 600 v 1 - vishay semiconductors product device code 5 1 3 2 4 6 7 8 9 vs- 20 e t f 06 s trl -m3
outline dimensions www.vishay.com vishay semiconductors revision: 08-jul-15 1 document number: 95046 for technical questions within your region: diodesamericas@vishay.com , diodesasia@vishay.com , diodeseurope@vishay.com this document is subject to change without notice. the products described herein and this document are subject to specific disclaimers, set forth at www.vishay.com/doc?91000 d 2 pak dimensions in millimeters and inches notes (1) dimensioning and tolerancing per asme y14.5 m-1994 (2) dimension d and e do not include mold flas h. mold flash shall not exceed 0.127 mm (0 .005") per side. these dimensions are measu red at the outmost extremes of the plastic body (3) thermal pad contour optional with in dimension e, l1, d1 and e1 (4) dimension b1 and c1 a pply to base metal only (5) datum a and b to be dete rmined at datum plane h (6) controlling dimension: inch (7) outline conforms to jedec ? outline to-263ab symbol millimeters inches notes symbol millimeters inches notes min. max. min. max. min. max. min. max. a 4.06 4.83 0.160 0.190 d1 6.86 8.00 0.270 0.315 3 a1 0.00 0.254 0.000 0.010 e 9.65 10.67 0.380 0.420 2, 3 b 0.51 0.99 0.020 0.039 e1 7.90 8.80 0.311 0.346 3 b1 0.51 0.89 0.020 0.035 4 e 2.54 bsc 0.100 bsc b2 1.14 1.78 0.045 0.070 h 14.61 15.88 0.575 0.625 b3 1.14 1.73 0.045 0.068 4 l 1.78 2.79 0.070 0.110 c 0.38 0.74 0.015 0.029 l1 - 1.65 - 0.066 3 c1 0.38 0.58 0.015 0.023 4 l2 1.27 1.78 0.050 0.070 c2 1.14 1.65 0.045 0.065 l3 0.25 bsc 0.010 bsc d 8.51 9.65 0.335 0.380 2 l4 4.78 5.28 0.188 0.208 c b detail a c2 a a a 0.004 b m a lead tip (3) (3) view a - a (e) (d1) e1 b h a1 detail ?a? rotated 90 cw scale: 8 :1 l gauge plane 0 to 8 l3 l4 seating plane section b - b and c - c scale: none (4) (4) ( b , b 2) b 1, b 3 (c) c1 base metal plating conforms to jedec ? outline d 2 pak (smd-220) 13 2 d c a l2 e (2)(3) (2) 4 h bb 2 x b 2 x b 2 l1 0.010 a b m m (3) e 2 x pad layout min. 11.00 (0.43) min. 9.65 (0.3 8 ) min. 3. 8 1 (0.15) min. 2.32 (0.0 8 ) 17.90 (0.70) 15.00 (0.625) 2.64 (0.103) 2.41 (0.096)
legal disclaimer notice www.vishay.com vishay revision: 13-jun-16 1 document number: 91000 disclaimer ? all product, product specifications and data ar e subject to change with out notice to improve reliability, function or design or otherwise. vishay intertechnology, inc., its affiliates, agents, and employee s, and all persons acting on it s or their behalf (collectivel y, vishay), disclaim any and all liability fo r any errors, inaccuracies or incompleteness contained in any datasheet or in any o ther disclosure relating to any product. vishay makes no warranty, representation or guarantee regarding the suitability of th e products for any particular purpose or the continuing production of any product. to the maximum extent permitted by applicable law, vi shay disclaims (i) any and all liability arising out of the application or use of any product , (ii) any and all liability, including without limitation specia l, consequential or incidental damages, and (iii) any and all implied warranties, includ ing warranties of fitness for particular purpose, non-infringement and merchantability. statements regarding the suitability of products for certain types of applicatio ns are based on vishays knowledge of typical requirements that are often placed on vishay products in generic applications. such statements are not binding statements about the suitability of products for a particular applic ation. it is the customers responsibility to validate tha t a particular product with the prope rties described in the product sp ecification is suitable for use in a particular application. parameters provided in datasheets and / or specifications may vary in different ap plications and perfor mance may vary over time. all operating parameters, including ty pical parameters, must be va lidated for each customer application by the customer s technical experts. product specifications do not expand or otherwise modify vishays term s and conditions of purchase, including but not limited to the warranty expressed therein. except as expressly indicated in writing, vishay products are not designed for use in medical, life-saving, or life-sustaining applications or for any other application in which the failure of the vishay product could result in personal injury or death. customers using or selling vishay product s not expressly indicated for use in such applications do so at their own risk. please contact authorized vishay personnel to obtain writ ten terms and conditions rega rding products designed for such applications. no license, express or implied, by estoppel or otherwise, to any intellectual property rights is gran ted by this document or by any conduct of vishay. product names and markings noted herein may be trademarks of their respective owners.
|
